LED Chaser with Raspberry pi pico in micropython programming


LED Chaser with Raspberry pi pico


from machine import Pin

from time import sleep


led1 = Pin(10, Pin.OUT)

led2 = Pin(11, Pin.OUT)

led3 = Pin(12, Pin.OUT)

led4 = Pin(13, Pin.OUT)

led5 = Pin(14, Pin.OUT)

led6 = Pin(15, Pin.OUT)

def Led_chaser (a,b,c,d,e,f):

    led1.value(a)

    led2.value(b)

    led3.value(c)

    led4.value(d)

    led5.value(e)

    led6.value(f)

    sleep(0.25)


while True:

    Led_chaser(0,0,0,0,0,0)

    Led_chaser(0,0,0,0,0,1)

    Led_chaser(0,0,0,0,1,1)

    Led_chaser(0,0,0,1,1,1)

    Led_chaser(0,0,1,1,1,1)

    Led_chaser(0,1,1,1,1,1)

    Led_chaser(1,1,1,1,1,1)

    Led_chaser(1,1,1,1,1,0)

    Led_chaser(1,1,1,1,0,0)

    Led_chaser(1,1,1,0,0,0)

    Led_chaser(1,1,0,0,0,0)

    Led_chaser(1,0,0,0,0,0)

   

    

    

    

Comments

Post a Comment

Popular posts from this blog

4 Stage Timer With DS3231RTC Module.

Image
Componet List 1-Arduino Uno or Arduino Nano 2-DS3231 RTC Module 3-16x2 LCD screen 4-5v 2A DC Regulated power Supply 5- 5v DC, 10A single Channel Relay Module  6-ON/OFF Switch 7-Normaly open Push buttons-4 Numbers 8-Green LED with Holder 9-10 K Preset 10-100 Ohm Resistance 11-10 A barrel fuse with Holder 12-13 A /AC Socket Outlet 13-PG Gland 14-3 core 4 mm copper flexible cable. 15-13 A ,3 pin Plug 16- Plastic Mounting screws. 17-8"x 5" Size PVC junction Box. 18-5 Volt DC Buzzer 19-4 mm square single core wire 20-Female Header Connector. ------------------------------------------------  #include <DS3231.h>//Memanggil RTC3231 Library #include <Wire.h>  // i2C Conection Library #include <LiquidCrystal.h> //Libraries #include <EEPROM.h> LiquidCrystal lcd(2, 3, 4, 5, 6, 7); //Arduino pins to lcd #define bt_clock  A0 #define bt_up     A1 #define bt_down   A2 #define bt_timer  A3 #define relay 8 #define buzzer 13 // Init DS3231 DS3231  rtc(SDA, SCL); // Init
Read more

Interfacing KY038 sound sensor with Raspberry pi Pico

Image
Micropython code from machine import Pin #importing Pin Class from machine module. import utime #importing time module led=Pin(15,Pin.OUT)  #created an led object and assigning the GPIOPin 15 to as an OUTPUT button=Pin(16,Pin.IN,Pin.PULL_DOWN) #created an object button and assigned to GPIO Pin 16 as an INPUT PULL_DOWN. def led_toggle(irq): #created a function led_toggle.     global led     led.toggle()       button.irq(trigger=Pin.IRQ_RISING,handler=led_toggle)  
Read more

Interfacing MQ2 Gas & Smoke Sensor With Raspberry Pi Pico

Image
Click on the link below to Download the Code from GITHUB https://github.com/anokhramesh/MQ2Gas-and-Smoke-with-Raspberry-pi-pico import machine,time from machine import Pin,PWM import utime MQ2 = machine.ADC(26) led_red = Pin(14,Pin.OUT) led_green = Pin(15,Pin.OUT) buzzer = PWM(Pin(13)) conversion_factor =3.3/(65535) while True:     smoke_value = MQ2.read_u16()     voltage =MQ2.read_u16()*conversion_factor     print("Smoke_value is",smoke_value)     #print("Voltage is",voltage)     utime.sleep(4)     if smoke_value<=6000:         led_green.toggle()         time.sleep(0.2)     else:         led_green.off()              if smoke_value>=10000:         buzzer.freq(500)         buzzer.duty_u16(90000)         time.sleep(0.9)         buzzer.duty_u16(0)         time.sleep(0.7)         buzzer.duty_u16(1)         led_red.on()         time.sleep(0.2)     else:         led_red.off()         buzzer.deinit()         
Read more